Wednesday, September 12, 2007

wai wai operation

i've done a small tutorial on how to reload wai wai at here and hopefully it helps... Wink

Note this few part that need to be open. (suggest by using finger nail if you have long finger nail or else use screw driver)
1.top view

2.left view

3.right view

4.bottom view


after you open the things on picture 2 and 3 you will have this

5

after open that part out, this is the few spot you need to open it carefully.
6


7


8


this is how it looks like when you pick them up from the lock

9


10


11


12


after you open all those spot, you will end up with this

13


use this tool to operate the whole wai wai
for the two stick thingies, i suggest use some material like bonus link card material, it won't spoil wai wai. if you use screw driver Confused
the left one is the stick to stuck the wheel, dimension (3mm x 25mm)
middle one is use to roll the film, (4mm x 30-40mm(longer will be easier))
the right one is the things to stuck at the hole so that the advance wheel can be turn to left( i use cotton bud stick)
14



in the picture below, plug in the stick and turn the wheel to the right and let it stuck at there( note this is important and don't let it lose or drop out)
if you stick drop out in reloading process, everything have to restart.
15


i'll stick some tape to stick the film to the white color roll. stick more to enable the film can roll successfully. (note: when you almost finish the roll of film, you will find it hard to turn because of the sticker, but do not use all the force to turn until the sticker go into the film and that time you'll in trouble because the lab worker will have a hard time to take out the film, just open the case and remove the sticker and roll the rest back)
16


remember to take this off before you reload( i always forget)
17


close the cover and it will look like this( don't let it drop out)
18


always remember to close the cover or else you will end up with something like this
19
=
20
=

this is my way of holding the camera and it successfully reload with this postion. hehe
21


22


23


regarding of the b shutter mode, tie the string here.
24



this is the video i record on how to reload it.
http://www.youtube.com/watch?v=jaXlIHgHCnA
thanks for the patient for reading this and sorry for my poor english! Wink


2 comments:

  1. great tutorial there dude...
    but if i do have u, why shud i bother about the tutorial...?
    haha...

    ReplyDelete
  2. haha... no prob dude.. i will do for you if you wan to ^______^

    ReplyDelete

跟我聊聊天